3.Press CLOCKSET once. The display window will show the hour only.
EXAMPLE:
4.Press and hold either TIMEFWD or BACKTIME until you
reach the correct hour and AM/PM designa- tion (AM begins at midnight; PM begins at noon).
5.Press DAYSET once. The display will show the
day of the week as an abbreviation (MO for Monday, TU for Tuesday, etc.).
6.Press and hold either TIMEFWD or BACKTIME until you reach the current day of the week.
7.Press PRGMRUN once. The display will show the
correct time and room temperature alter- nately.
Enter Heating Program
During programming, if you don’t press any buttons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant temperature. The display will revert to the alter- nating time/temperature display. To resume pro-
gramming after this happens, press PRGMVIEW until
you are at the point where you stopped program- ming. Then you may continue to enter your programs normally. If you want to stop program-
ming at any time, simply press PRGMRUN to resume
program operation.
25
