7 PROGRAMMING YOUR THERMOSTAT
CONTINUED FROM FIFTH PAGE
However, you may use the same heating and cooling tempera- tures for consecutive time periods. You can choose start times, heating temperatures, and cooling temperatures independently for each day programs (for example, you may select 5:00 AM and 70° as the 1st period heating start time and temperature on Monday, then select 7:00 AM and 76° as the 1st period cooling start time and temperature on Monday). Use the table at the bottom of the page to plan your program time periods and the temperatures you want during each period. You may also want to look at the sample program table to get an idea of how the thermostat can be programmed.
Entering Your Program
Follow these steps to enter the heating and cooling programs you have selected.
Set Current Time and Day
1. Press TIME button once. The display will show the hour only.
3. Press TIME once. The display window will show the minutes only.
EXAMPLE:
4.Press and hold either
or 
until you reach the correct minutes.
5.Press TIME once. The display will show the day of the week.
6.Press
or
until you reach the current day of the week.
7.Press RUN once. The display will show the correct time and room temperature alternately.
Enter Heating/Cooling Times and Heating
Temperatures
1.Move the SYSTEM switch to HEAT.
2.Press PRGM once. MO, the abbreviation for Monday, will be displayed. Also displayed are the currently programmed start time for the 1st heating period and the currently programmed temperature fo rthe 1st heating period (flashing).
MO TU WE TH FR
EXAMPLE: | PM |
EXAMPLE:
AM
2.Press and hold either
or 
until you reach the correct hour and AM/PM designation (AM begins at midnight; PM begins at noon).
SAMPLE
Heating/Cooling Schedule Plan (Factory Program)
|
| ALL DAYS OF THE WEEK | |
|
|
|
|
| Period | Start Time | Temperature |
| 1ST | 6:00 AM | 70 F |
HEAT |
|
|
|
3RD | 5:00 PM | 70 F | |
| 2ND | 8:00 AM | 62 F |
|
|
|
|
| 4TH | 10:00 PM | 62 F |
|
|
|
|
| 1ST | 6:00 AM | 78 F |
COOL |
|
|
|
3RD | 5:00 PM | 78 F | |
| 2ND | 8:00 AM | 85 F |
|
|
|
|
| 4TH | 10:00 PM | 82 F |
|
|
|
|
This example shows that for the 1st Monday heating period, the start time is 6:00 AM, and 70° is the programmed tempera- ture (this example reflects factory preprogramming).
3.If the temperature displayed in not the temperature you want
for Monday”s period 1, press 
or 
until the correct temperature is displayed.
4.To change the displayed start time to the time you have selected for Monday’s heating period 1, press TIME once (the
programmed time will flash). Press 
or 
until your selected time is displayed. The time will change in 15 minute increments.
5.Press PRGM once. The currently programmed start time and heating setpoint temperature for Monday’s heating period 2 will be displayed.
6.Repeat steps 3 and 4 to select the start time and heating temperature for Monday’s 2nd heating period.
7.Repeat steps 3 through 5 for Monday’s 3rd and 4th heating period. Monday’s heating program is now complete.
Heating/Cooling Schedule Plan
|
| PERIOD 1 |
| PERIOD 2 |
| PERIOD 3 |
| PERIOD 4 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| HEAT | COOL | HEAT | COOL | HEAT | COOL | HEAT | COOL | ||||||||
| Time | Temp | Time | Temp | Time | Temp | Time | Temp | Time | Temp | Time | Temp | Time | Temp | Time | Temp |
Mon |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tues |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wed |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thur |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fri |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sat |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sun |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
