White Rodgers T7351F, T7350 manual ZonePRO Applications, Hydronic Control Modulating Heating

ZonePRO® Applications

Stand Alone VAV Pressure Dependent (VVT Zoning) Control

•Typical building applications include zoning for office buildings, airports, strip-malls and multi-tenant facilities that have multiple terminal zones that run off of a single air-handler.

•Thermostats provide modulating control (floating or analog) for each zone.

•Can be configured for cool only, heat only or

auto changeover. Up to 2 re-heat outputs are available if the discharge air from the air handler needs to be heated at the zone. (B models)

•Remote sensors are compatible with all ZonePRO® models if remote room sensing or return air temperature sensing is desired.

•May also be used at the air handler to control the temperature of the fresh air supply or provide limited cooling using outdoor air when appropriate.

•All ZonePRO thermostats come with energy-saving range stop and night setback configurability.

Hydronic Control &

Modulating Heating

•Can be used for modulating hydronic heating or cooling applications.

•Other common applications include radiant panel heaters, cabinet heaters, fin-tube radiators and other electric or hydronic re-heat applications.

TB7980B1005: Cooling Only Pressure Dependent VAV Zone Reheat and Electric Baseboard Heat

Supply Air Temperature Sensor

Modulating Damper
Actuator	Hot Water
	Coil

R841	Electric Baseboard Heat
Relay

19