TYPE 1E56
INSTALLATION INSTRUCTIONS
Operator: Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE.
DESCRIPTION
This low voltage thermostat is designed to provide conve- nient control of the heating/cooling system. To provide greater room comfort, the sensitive spiral bimetal is com- bined with an adjustable heating anticipator and a fixed cooling anticipator to provide maximum comfort.
PRECAUTIONS
If in doubt about whether your wiring is millivolt, line, or low voltage, have it inspected by a qualified heating and air conditioning contractor, electrician, or someone familiar with basic electricity and wiring.
Do not exceed the specification ratings.
All wiring must conform to local and national electrical codes and ordinances.
This control is a precision instrument, and should be handled carefully. Rough handling or distorting compo- nents could cause the control to malfunction.
CONTENTS |
|
Description | 1 |
Precautions | 1 |
Installation | 2 |
Select Thermostat Location |
|
Route Wires to Location |
|
Attach Subbase to Walls |
|
Attach Thermostat to Subbase |
|
Operation & Maintenance | 5 |
Adjusting Heat Anticipator |
|
Calibrating Thermostat |
|
!CAUTION
To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.
Do not short out terminals on gas valve or pri- mary control to test. Short or incorrect wiring will burn out heat anticipator and could cause per- sonal injury and/or property damage.
!WARNING
Do not use on circuits exceeding 30 volts. Higher voltage will damage control and could cause shock or fire hazard.
EMERSON ELECTRIC CO. |
| PART NO. | |
Printed in U.S.A. | Replaces | ||
9797 REAVIS ROAD | |||
ST. LOUIS, MISSOURI |
| 9509 |
