Whynter AFR-300 Remote Control Operation, ON/OFF Turns on / off the air purifier

REMOTE CONTROL OPERATION

1.ON/OFF: Turns on / off the air purifier.

2.LOCK: Press the “LOCK” (No. 2) button on remote control to lock the air purifier. All the buttons on the air purifier and the remote control are disabled except the “LOCK” button on the remote control. To unlock the air purifier,

press this button again. You can also unplug and restart the air purifier.

2.FAN: Sets fan speed setting in the cycle of High –> Medium –> Low –> Silent.

3.SILENT: Sets the air purifier to run at a noise level below 35 dB to ensure sound sleep. By pressing this button, this machine will be switched into the “SILENT” fan mode.

4.SLEEP: Sets running time of the air purifier at SLIENT mode for 8 hours. In the SLEEP mode, the TIMER function cannot be used.

5.UV Lamp: Turns on / off the photo-catalyst POC function.

6.UV Lamp timer reset: If the UV Lamp is replaced, press the RESET button to set the timer to zero.

7.HEPA filter timer reset: After the HEPA filter is replaced, press the RESET button to set the timer to zero.

8.LED: Turns on / off the background LED light.

9.Intentionally removed.

10.TIMER: By pressing “TIME” button once, “88:88” will be displayed, press the “+” & “-” buttons to set the current time. When the air purifier is turned on, press the “TIME” button twice quickly, “88:88 time off” will be displayed, then press the “+” & “-” buttons to adjust the time off. When the machine is on Standby mode, press the “TIME” button twice quickly, “88:88 time on” will be displayed, then press the “+” & “-” buttons to adjust the activation time

11.ANTI-POLLEN: Turns on the pollen-removing function. This mode of operation is recommended for pollen season. The fan speed will run in a cycle of medium speed for 5 minutes and low speed for 5 minutes.

8