The unit is an electrical appliance. To avoid injury from electrical shock do not operate it with wet hands, while standing on a wet surface or while standing in water. Do not use it in outdoors or in wet conditions.

When positioning or moving the unit, ensure it is not turned upside down or greater than 45° or more off level.

This unit is designed for household, non-commercial use only. Any other use will void the warranty.

Do not plug into the power outlet before set up is completed.

Do not operate this unit without the air filter(s).

Do not use harsh chemicals to clean the filter(s). Dry thoroughly before inserting the filter(s) into the unit.

Do not add extra length to the exhaust hose by more than a total length of 9’. This will reduce the cooling efficiency of the portable air conditioner.

At the end of each season, all water must be drained from the unit and filter(s) must be cleaned before storage.

THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE INSTRUCTIONS

ARE NOT FOLLOWED.

OPERATING CONDITION

MODE

ROOM TEMPERATURE

COOL

Higher than 64°F

 

 

DRY

Higher than 60°F

 

 

HEAT

Higher than 45°F

 

 

Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI) plug. This plug reduces the risk of fire due to arcing faults in the power supply cord. Please follow the instructions below to ensure that LCDI plug works properly.

1.Plug the power cord to a grounded wall outlet. Do not plug to a power strip or extension cord.

2.Press the TEST button on the plug. This should trip the plug and cut the power to the air conditioner. If the plug does not trip and the unit comes on, please contact technical support.

3.Press the RESET button to start the air conditioner.

4.Do NOT use the TEST and RESET buttons to turn the air conditioner on and off.

5 P a g e

Page 5
Image 5
Whynter ARC-12SDH instruction manual Operating Condition, Mode Room Temperature, Dry, Heat