FRONT PANEL
SWITCHING ON/OFF THE AIR CONDITIONER
∙The unit can be switched ON or OFF by pressing the Emergency on/off switch button 
on the front display panel or the remote control.
NOTE: The functions of the portable air conditioner can be switched on by the remote control ONLY. Without using the remote control, the unit can only be switched on at the previous setting and turn off the unit.
LED LAMPS ON/OFF SWITCH
∙Press the LED lamps on/off switch to turn on and off the LED lamps indicators.
WARNING LIGHT
∙When the internal water reservoir is full, the red light will flash and the unit will stop. Remove the drain plug to drain out the water and the unit will restart at the previous setting.
∙BEFORE USING YOUR PORTABLE AIR CONDITIONER
∙Remove the exterior and interior packaging.
∙Before connecting the unit to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
COOLING MODE
∙In this mode, the air conditioner cools and dehumidifies the room. To activate this function
mode, press the Mode Control button until the 
indicator comes on. When the cooling mode is set, the blue light on the front panel comes on and the compressor will start in approximately 3 minutes.
NOTE: In cooling mode, hot air is exhausted from the outdoor exhaust port and the exhaust hose must be connected to exhaust out the hot air.
∙The temperature setting range of this air conditioner is from 61°F to 89°F. To set the
temperature, press the 
or 
buttons. This air conditioner has a 5°F temperature cushion which if the set temperature is within 5°F of the ambient temperature, the unit runs on fan only mode. This saves energy and prolongs the life of the compressor of the air conditioner. Once the set temperature is achieved, the fan runs continuously.
∙To set the fan speed, press the Fan Speed button. In cooling mode, the difference in noise level between the fan speeds is not very noticeable when the compressor is on. Try setting the unit to Fan only mode, you should be able to hear the difference between high and low fan speed settings.
12 P a g e
