Samsung ST-510 Entering the menu, Remembering the Position, Moving to the remembered position

Auto Wall-Mount Adjustment (Sold separately) (depending on the model)

Once the auto wall mount is installed, your TV’s position can be easily adjusted.

TV Rear Panel Auto Wall-Mount

SERVICE Cable (Not supplied)

Entering the menu

1.Press the ▲, ▼, ◄ or ► button on your remote control.

N The Wall Mount Adjustment screen is displayed.

N If the Auto Wall-Mount screen is not displayed when clicking on a direction button while watching your TV, use the menu to display that screen.

-Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTERE button.

-Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press the ENTERE button.

Remembering the Position

Setup

Preference
Digital Text	: Enable
Wall-Mount Adjustment		►
Melody	: Off
Entertainment	: Off
Energy Saving	: Off
PIP
Software Upgrade
Common Interface

2. Adjust to the desired position using the ▲,▼,◄,► buttons.
N If you press an arrow button when no OSD is displayed on the TV screen,
	Wall-Mount Adjustment
the Adjustment screen appears.

NPress the INFO button to reset. Press the ◄ or ► button to select “Yes”, then press the ENTERE button. The position is initialized to the default

setting.
3. Press the blue button. Press the ▲ and ▼ buttons to select a save mode from	Position		2	
either Position 1, Position 2 or Position 3 in order to save the current position.			Adjust	Save	Centre

NTo not save the current position, press the RETURN button.

OWhen selecting a save mode, you cannot use the Colour buttons.

4.Press the ENTEREbutton to save.

NWhen Position1 is selected, the message “Current position saved as Position1” is displayed.

5.Press the ENTERE button.

NThe saved Position appears on the left side of the OSD.

Moving to the remembered position

1.Complete Step 1 of “Entering the menu”.

2.Pressing a Colour (Red, Green, Yellow) button moves the auto wall mount to the saved position.

N You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.

N If you adjust the Position after moving to a pre-set position, the position display will disappear.

Save

Select a mode to save.

Position

Position2

Position

Move Enter Return

NFor installation, refer to the Installation Manual provided with the wall mount.

NFor product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.

NThis installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer.

NThe auto wall mount will not work when Anynet+ or WISELINK Pro is operating.

N37, 40 and 46 models are not compatible with the older wall mount model (WMN5090A).

English -