Samsung ST-305, ST-510 Setting Up Anynet+, Scanning and Switching between Anynet+ Devices

Setting Up Anynet+

❑Anynet+(HDMI-CEC)

“Tools → Anynet+(HDMI-CEC)” performs the same function.

Setup

•Anynet+(HDMI-CEC) → Off / On: To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

N When the “Anynet+ (HDMI-CEC)” function is disabled, all the Anynet+ related operations are deactivated.

•Auto Turn Off → No / Yes: Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off

N The active source on the TV remote must be set to TV to use the Anynet+ function.

NIf you set “Auto Turn Off” to “Yes”, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.

Application	WISELINK Pro
	Anynet+ (HDMI-CEC)	►
	Content Library
	InfoLive
	Product Guide

Device List

Setup

UMove EEnter RReturn

	Set up
Anynet+ (HDMI-CEC)	: ON
	Off
Auto Turn Off	: Yes
	On

UMove EEnter RReturn

Scanning and Switching between Anynet+ Devices

1.Press the TOOLS button. Press the ENTEREbutton to select “Anynet+ (HDMI-CEC)”.

2.Press the ▲ or ▼ button to select “Device List”, then press the ENTERE button

N Anynet+ devices connected to the TV are listed. If you cannot find a device you want, press the red button to scan for devices.

N Only when you set “Anynet+ (HDMI-CEC)” to On in the “Setup” menu, the “Device List” menu appears.

3.Press the ▲ or ▼ button to select to a particular device and press the

ENTEREbutton. It is switched to the selected device.

View TV
Device List
Recording	:	DVDR
DVDR Operation
Receiver	:	On
Setup

UMove EEnter RReturn

NSwitching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. N The time required to scan for devices is determined by the number of connected devices.

N When the device scan is complete, the number of devices found are not displayed.

N Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the connected device.

N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the “Device List”.

English - 52