Whynter #:IMC490SS instruction manual LCD Display Overview

LCD DISPLAY OVERVIEW

1. ON/OFF INDICATOR

This indicator is displayed all the time to show that the unit is plugged in and receiving power. The unit is operation when the ICE SIZE INDICATOR (7.) is on.

2. ICE FULL INDICATOR

When the ice basket is full, this indicator will be displayed. The indicator will remain until the ice in the basket either melts away slowly or has been removed. The unit will stay in a “Standby” mode until the ice has been removed / melted at which time the unit will automatically start operation as normal.

3. WATER INDICATOR

When the water indicator is solid, the unit is pumping water to make ice. If the water level is too low, the indicator will flash and the ice maker will stop working automatically. Once you add wa- ter to the unit, the indicator will turn off and the ice maker will resume normal operation.

4. WARNING INDICATOR

This indicates that there is an error with the unit. Please check Troubleshooting page.

5. SELF-CLEANING INDICATOR

Indicates unit has entered self-cleaning program. (see Cleaning your Ice Maker on page 9)

6. TIMER INDICATOR

Displays remaining time when unit to turn ON or OFF. (see Timer Setting Instructions on page 8)

7. ICE SIZE INDICATOR

This ice maker produces bullet-shaped ice. Each time you press this button the cube size selection will change between Small, Medium, and Large. The chosen mode shall stay as selected unless changed or there is a power failure. For the most efficient operation when ambient temperature is below 59ºF, use the small cube size setting.

6