Williams Sound Sonata 88 manual Connectors, Using the AC power jack, Using Headphones

The Connectors

Using the AC power jack

1. Connect the power	2. Ensure the piano	ON
cable to the AC power	is turned off when	OFF
jack on the underside	connecting and
of the piano body.	disconnecting the	POWER
	power.

3. Turn the volume switch	4. Plug the power cable
anti-clockwise to reach	into an AC power
the minimum volume	outlet.
level.

5.If you have done the above procedures you are now safe to turn on the piano.

Caution: When the piano is not in use or during a thunderstorm, disconnect the power for safety sake.

Using Headphones

An optional set of stereo headphones can be connected to the headphones jack located on the left underside of the piano body. When a pair of headphones is connected to the jack, the internal speakers will switch off automatically.

Caution: Never use the headphone with high volume, as it may damage your sense of hearing. To prevent the damage of the speakers, ensure that the volume is set to the minimum level before connecting the power and other device.

Using the AUX.OUT jack

Connect the rear-panel AUX.OUT jack to amplified speakers, amplifiers or domestic hi-fi-units for external amplification.

Note: Connect both left(L) and right(R) channels for the stereo result. If you only connect either one of the channels, the connected channel will only take effect.

8