®
12
USING THE PPA R35 RECEIVER
Note: Rechargeable batteries are shipped in a discharged state and must be charged overnight
before using.
1. Make sure there are two charged AA batteries in the Receiver. If batteries are not installed, see
Battery Information on page 15.
NOTE: The ON indicator will illuminate RED to indicate low battery.
2. Plug the earphone or headphone into the “Ear” jack on top of the Receiver.
3. Place the headphones over your ears.
4. Turn the receiver on by rotating the volume control knob clockwise. The receiver’s ON indicator
should illuminate green.
5. Adjust the receiver volume control to a comfortable listening level.
You should be able to hear someone speaking into the transmitter microphone.
On/Off
Volume Switch
Earphone
Jack
"On" Indicator
LED
FIG. 8: PPA R35 RECEIVER TOP VIEW