![](/images/new-backgrounds/1273207/27320713x1.webp)
TX238
5 TV Microphone
If an RCA connection is unavail- able, use the provided TV micro- phone to pickup the sound source directly from the TV loud speak- er as shown on right.
TX238 Transmitter (Rear View) |
|
| OR |
4
1 | 2 | 3 |
STEP 1: CONNECT THE TRANSMITTER POWER SUPPLY
Plug the Power Supply cord into the “DC 12V” jack 1 on the back of the TX238. Then plug the Power Supply into an AC outlet. When the receiver is placed into the charging cradle built into the top of the transmitter, the center charging indicator on the front of the TX238 will turn on. When the spare battery is plugged into the left or right battery charging port on the trans- mitter, the corresponding charge indicator light will turn on.
STEP 2: CONNECT THE TRANSMITTER TO THE AUDIO SOURCE
Use the supplied red and white RCA audio cables to connect the TX238 Transmitter directly to the TV, VCR, or stereo “AUDIO OUT” jacks. If your television does not have “AUDIO OUT” jacks, you will need use the supplied TV microphone. See page 9 for TV microphone instructions.
®
7