Williams Sound WIR RX16 manual Operating Instructions, Fig. a Front View

OPERATING INSTRUCTIONS

Before you begin using the RX16 receiver, make sure the IR transmitter being used is transmitting on 2.3 MHz or 2.8 MHz frequencies. Make sure the audio source is on, and the receiver battery is fully charged.

The RX16 Receiver has an automatic on/off function. When you put the receiver on, it turns on. When you take the receiver off, it turns off. Use the 3-position selection switch to choose from 2.3 MHz, 2.8 MHz, or stereo mode. Rotate the Volume Control to adjust the volume to a comfortable listening level.

A dual detector infrared “eye” is located on the front of the receiver. Do not cover it up or you will lose reception. Make sure the “SOUND PLUS” label is facing away from you when you put the receiver on.

The RX16 Receiver should be charged when not in use.

Optional multiple battery charger: CHG 238. Charges up to 12 BAT AP97A NiMH rechargeable batteries

Fig. A (Front View)

Frequency Selection

Switch: 2.3 MHz,

2.8 MHz, Stereo

Volume Control Knob

Sound Plus ®

BAT AP97A

Rechargeable NiMH Battery

3