WindChaser Products PACR9S manual a b c d e f g, Timer Programming, Dehumidification Operation

a)

b)

c)

d)

e)

f)

g)

a)LCD Screen

b)Power ON/OFF Button

c)Timer and Thermostat Setting Buttons

d)Mode Button

(Select A/C, Fan or Dehumidifier)

e)A/C Fan Speed Button

(High, Medium or Low)

f)Timer ON/OFF Button

g)Fahrenheit / Celcius Selector

TIMER PROGRAMMING

1.To set the Shut-Off Timer on the unit, make sure the unit is on, then press the TIMER SETTING button on the control panel or the () button on the remote control .

2.Press the ( ) button on the remote or the (+) button on the control panel to set the desired time. If the setting is higher than desired, press the ( ) on the remote control or the (-) on the control panel to lower the time.

3.Finally press the () button on the remote or the “TIME SETING” button on the control panel to enter the selected off time to finalize the setting.

4.To activate the ON Timer, follow the instructions above, but the unit must be turned off first.

DEHUMIDIFICATION OPERATION

Press the “MODE” button on the control panel or ( ) button on the remote to select the dehumidifier mode. When the dehumidifier mode is on, the temperature buttons and the fan speed buttons do not function and the fan will operate on low speed. The dehumidifier indicator light will illuminate and stay solid while the unit is dehumidifying. When the humidity in the room is 50% or lower, the compressor will not run, the unit will not dehumidify, and the dehumidifier light will blink. Remember, the exhaust hose does not need to be used in dehumidifier mode.

7