Windsor 10070570, CMPS2E, 10070560 Grounding Instructions, GROUNDING INSTRUCTIONS 120V ONLY

Models: CMPS2E CMPS2 10070560 10070570

1 62
Download 62 pages 20.8 Kb
Page 7
Image 7
GROUNDING INSTRUCTIONS (120V ONLY)

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.

EXTENSION CORDS:

If an extension cord is used, the wire size must be at least one size larger than the power cord on the machine, and must be limited to 50 feet (15.5m) in length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

GROUNDING INSTRUCTIONS (120V ONLY)

GROUNDING INSTRUCTIONS

GROUND-FAULT CIRCUIT-INTERRUPTER PROTECTION (120V ONLY)

This pressure washer is provided with a (GFCI) built into the plug of the power supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection. If the GFCI is not the AUTOMATIC RESET TYPE, it must be manually TESTED and RESET each time the cleaning system is plugged in. Press firmly to assure internal spring activates switch. Push “test“ then push “reset”. Motor will not start if GFCl does not reset. Check circuit breakers or outlet. If circuit breaker is not tripped and unit will not reset, contact local service center.

CMPS2 86305210 04/23/08

2-3

Page 7
Image 7
Windsor 10070570, CMPS2E, 10070560 manual Grounding Instructions, GROUNDING INSTRUCTIONS 120V ONLY