MACHINE OPERATION

PRE-RUN MACHINE INSPECTION

1.Disconnect the battery charger. (See battery charging procedure).

2.Close the cover.

3.To raise the deck: Turn on the main power switch and press the burnishing head switch.

4.Turn or install a new burnishing pad as needed. NOTE: Pad lock has left hand threads. To loosen turn clockwise.

5.Check wheels and other pivot points for proper lubrication.

OPERATING THE MACHINE

1.If using a machine that is already set up, check to make sure the pad is properly installed.

2.Adjust the operating control handle to a comfortable position using the handle lock lever.

3.Turn on the main power switch.

4.Lower or raise deck by pressing burnishing head switch.

5.The pad motor will only run when the burnishing head is lowered to within 3 inches of the floor.

6.The drive controls are shown on page 3-1.

7.The pad pressure is adjusted using the knob at center of panel. The operator monitors the amp draw using the meter located on the control panel and ensures that the needle remains in the “green” operating

range. (See page 3-1, #4 & 11).

To prevent possible damage to the floor surface, always keep the machine moving while the pad is spinning.

8.When the pad motor switch bar is squeezed, the pad motor runs.

9.Return the machine to the battery charger when the battery light indicator light is amber. Do not operate machine when indicator is flashing red.

FILTER BAG

The filter bag is accessed under the cover.

DUST CONTROL SKIRT

Replace skirt (86007290 – PRV NO. 730017) when worn, torn, or damaged in any way that allows dust to escape.

3-2ENG

86038450 04/12/07

Page 7 Page 9
Page 8
Image 8
Windsor L20T manual Machine Operation, PRE-RUN Machine Inspection, Operating the Machine, Filter BAG, Dust Control Skirt
Page 7 Page 9

10027110, L20, 10027100, L20T specifications

Windsor 10027110, L20, 10027100, and L20T are advanced heating and cooling systems designed to deliver efficient climate control in various settings. These models incorporate innovative technology and well-considered engineering features that make them stand out in the market.

One of the main features of these units is their energy efficiency. With rising energy costs and increasing environmental concerns, Windsor has focused on creating systems that minimize energy consumption while maximizing performance. The use of high-efficiency compressors and advanced heat exchange technology ensures that energy is used effectively, significantly reducing operating costs.

The Windsor 10027110 model, in particular, features a user-friendly interface that allows for easy temperature adjustments and programming. Users can easily manage their comfort settings, which further enhances the system's efficiency. The systems have the capability for precise temperature control, ensuring that spaces remain comfortable without unnecessary energy expenditure.

In terms of technology, these models are equipped with advanced inverter technology. This technology allows the units to adjust their power output according to the cooling or heating demand. By maintaining optimal performance without the usual energy spikes, inverter technology contributes to lower energy bills and a reduced carbon footprint.

Another notable characteristic of these Windsor systems is their durability and reliability. Built with high-quality materials and engineering processes, these units are designed to withstand the rigors of daily use in various climates. Regular maintenance and servicing can further extend their lifespan, making them a sensible long-term investment for homeowners and businesses alike.

Moreover, the Windsor L20 and L20T models are designed with noise reduction features, ensuring that they operate quietly. This is particularly beneficial in residential areas or in settings where a peaceful environment is paramount.

In conclusion, the Windsor 10027110, L20, 10027100, and L20T heating and cooling systems epitomize a perfect blend of efficiency, technology, and durability. Their user-friendly features and advanced engineering make them ideal solutions for individuals and businesses looking to optimize their climate control solutions while being mindful of energy consumption. These systems not only enhance comfort but also contribute positively to overall cost and environmental impact.
Top Page Image Contents