MACHINE OPERATION

PRE-RUN MACHINE INSPECTION

Do a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Follow the same procedure each time to avoid missing steps.

NOTE: See maintenance section for pre-run machine inspection checklist items.

STARTING MACHINE

NOTE: Perform pre-run machine check before operating machine.

FOR SAFETY: Before starting machine, make sure that all safety devices are in place and operating properly.

1.Turn the machine power on.

2.Release the parking brake, if your machine is equipped with this option.

3.Engage the direction propel levers for the desired direction.

EMERGENCY STOP PROCEDURES

1.Release the propel levers.

2.Turn machine power off with key switch.

3.If an electrical problem is suspected push in emergency stop button, if machine is equipped with this option.

4.Apply brakes, if your machine is equipped with this option.

FILLING SOLUTION TANK

FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine and remove key.

1.Turn the machine power off.

2.Set the parking brake if your machine is equipped with this option.

3.Remove solution tank cover.

4.Fill the solution tank with clean water, leaving enough room for the required amount of cleaning solution. The solution tank capacity filled to 2” (5 cm) from bottom of fill inlet is 23 gallons (87 liters). The water must not be hotter than 140° F (60°C) to prevent damage to the tank.

5.Measure the chemical into the solution tank. Liquid chemicals should be added to the solution tank after filling with water. Dry chemicals should

be thoroughly mixed before being added into solution tank. Commercially available, high alkaline floor cleaners, are suitable for use in the solution system.

NOTE: Read the chemical manufacturers recommended proportion instructions.

6.Replace solution tank cover.

!

Flammable materials can cause an explosion or fire. Do not use flammable materials in the tanks.

3-9

CUTTER 36V 86039090 04/03/07

Page 16
Image 16
Windsor SC326 10052220 manual Machine Operation, PRE-RUN Machine Inspection, Starting Machine, Emergency Stop Procedures

SC326 10052220, SCC326 10052260 specifications

The Windsor SCC326 and SC326 series represent innovative advancements in industrial cleaning equipment, designed to enhance efficiency and productivity in various environments. Specifically tailored for heavy-duty cleaning applications, these floor scrubbers combine powerful performance with user-centric features.

The SCC326 model boasts a robust design that is perfect for large commercial spaces like warehouses, airports, and shopping centers. Equipped with a high-capacity solution tank, the SCC326 enables prolonged cleaning sessions without frequent refills, minimizing downtime. The brush system utilizes dual rotating brushes to effectively agitate dirt and grime from surfaces, while the innovative scrub deck design allows for superior maneuverability in tight areas.

On the other hand, the SC326 model shares many of these characteristics but places an added emphasis on eco-friendly operation. With a focus on sustainability, the SC326 incorporates a smart scrub feature that optimizes water and chemical usage, ensuring that cleaning solutions are applied precisely where needed. This not only reduces environmental impact but also lowers operational costs over time.

Both models utilize advanced technology in their respective operations. They come equipped with an onboard diagnostic system, providing real-time feedback on performance and maintenance needs. This feature assists operators in staying informed about the machine's condition and significantly enhances reliability.

Ergonomically designed controls on both models ensure that users can operate them with minimal strain, promoting comfort during extended use. Additionally, their compact design allows for easy storage and transport, making them an excellent choice for businesses with diverse cleaning needs.

In terms of safety, both SCC326 and SC326 are fitted with automatic shut-off systems that activate in case of emergencies, thereby protecting users and equipment alike. This attention to safety standards reflects Windsor's commitment to providing top-tier cleaning solutions.

Ultimately, the Windsor SCC326 and SC326 series embody a blend of power, efficiency, and safety, catering to the rigorous demands of industrial cleaning tasks. Whether addressing large-scale surface areas or caring for intricate spaces, these models are engineered to deliver superior performance without compromising ease of use or environmental responsibility.