Windsor UB2000F, LB2000IA manual Technical Specifications, Dimension/Capacity

TECHNICAL SPECIFICATIONS

ITEM	DIMENSION/CAPACITY
Construction	Heavy-duty die cast aluminum deck with heavy-duty rubber
	bumper, tubular steel self adjusting handle with die cast aluminum
	handle housing.
Motor	1.5 hp
Transmission	Direct drive from motor shaft.
Pad speed	2000 rpm
Electrical system:
LB2000I, LB2000IA	230 volts, 50Hz
LB2000, UB2000F	115 volts, 60Hz
Cable	75’ [22.9 m]
Switches	Dual levers with safety lock.
Pad Holder	∅20” [50.8 cm] flexible disc
Wheels	Four ∅5” [∅12.7 cm], 1.25” [3.2 cm] wide, non-marking tread.
Handle	∅1.5” [∅3.8 cm] tubular steel, self adjusting handle consistently
	maintains full contact with the floor, and easy to use thumb
	activated safety lock.
Dimensions (L x W x H)	32” [81.3 cm] X 23.9” [60.2 cm] X 48.4” [122.9 cm]
Pad size (See note)	20” diameter x 1” thick

NOTE: Always use a pad, which has been designed for electric ultra high speed burnishing of at least 2000 rpm.

The sound pressure level at the operator’s ear was measured to be 70 dBA. This was a nearfield, broad-band measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source of impact noise. The instantaneous sound pressure level is below 63 Pa.

3-1 86309600 (2000) BURNISHER 10/08/08