CONTROLS
1Main Handle. Adjusts for operator comfort and storage.
2Brush on/off lever. Activates brush when depressed.
3Accessory vacuum hose and wand. Allows
operator to clean edges, recessed, ledges, | 7 | 8 |
upholstery, etc. |
4Detail tools Dusting brush, crevice and upholstery tools for above the floor cleaning. Dusting brush comes with adapter for attachment directly to hose. Upholstery and crevice tool connect directly to both the hose and the wand. The crevice tool fits loosely on the wand.
5Handle Adjustment Lever. Located on the left side of handle. Pull away from handle to loosen, adjust handle and press parallel to handle to tighten.
6Vac on/off switch. Turns on and off vac motor.
7Brush motor circuit breaker. Provides overcurrent protection for the brush motor.
8Vac motor circuit breaker. Provides overcurrent protection for the vacuum motors.
9Exhaust filter. Filters exhaust air for safe and quiet operation.
10Accessory hose activation pedal. Press pedal down to use the accessory hose. Lift up with toe for normal use.
11Brush adjustment lever. Allows operator to adjust brush to proper height for the carpet. (1) for low nap carpet, (5) for thick nap. Position (6) is storage.
12Dust bag cover. Raise to allow access to dust bag and vac motors.
13Cloth dust bag. High filtration cloth bag with zipper opening to access paper bag.
14Paper bag. Fits within cloth bag for clean and easy dust removal.
| WAVIF 86038520 05/15/07 |
|
