Operation for Bell TV Users
1
WINEGARD COMPANY
POWER ON
Press and hold [POWER] for two seconds or until the TRAV’LER interface displays “POWER ON.”
3
Enter User Menu?
*Yes No
Press and hold the [ENTER] button for two seconds.The TRAV’LER interface will ask if you wish to enter the User Menu. Press [SELECT] to choose “Yes”; then, press [ENTER].
2
connecting to
antenna
Now that the power is on, release the [POWER] button.
4
Installation*
Exit
The User Menu consists of four choices: Search Mode, Diagnostics, Installation, and Exit. Press [SELECT] until the asterisk is next to “Installation” and then press [ENTER].
Operation for Bell TV Users
11
SM ExpressVu
Success
The TRAV’LER interface box will display “in progress” and then “Success”.
13
Exit*
Select Antenna
Press [SELECT] until the asterisk is next to “Exit.” Press [ENTER].
12
Installation*
SM DTV Triple
Press [ENTER] and then choose [SELECT] until the asterisk is next to Installation. Press [ENTER].
14
Power Off?
Yes *No
The TRAV’LER interface box will ask if you want to turn the power off. Select “No” by pressing [ENTER].
5
Install Password
0000
The interface box will ask for a password. Press [ENTER] four times to enter code “0000” on the display.
7
6
Select Antenna*
Raise Antenna
Press [ENTER] to choose “Select Antenna.”
8
15
SM ExpressVu
Ready:
The TRAV’LER interface box will try to determine the type of dish that it is working with. The TRAV’LER interface will display the type of satellite dish on the top line.
16
SM ExpressVu
Searching...
The TRAV’LER antenna will enter the search mode as part of its normal operation.
LG Mount
SM Mount*
Press [SELECT] until the asterisk is next to “SM Mount,” and then press [ENTER].
9
SM Password
0022
Enter code “0022” by pressing [SELECT] to increase each number. Press [ENTER].
10
17
SM ExpressVu
Peaking...
The antenna will peak on a signal.
18
SM ExpressVu
*91 *82
The TRAV’LER antenna will lock onto two different satellites. As the antenna finishes searching, the antenna will display an asterisk for each satellite found.
SM ExpressVu*
Installation
Press [SELECT] until the asterisk is next to “SM ExpressVu.” Press [ENTER].
3
SM ExpressVu
*Yes No
Press [SELECT] until the asterisk is next to “Yes.” Press [ENTER].
Operation
TIP If you want to turn off the power to the TRAV’LER antenna after the antenna has locked onto satellites, press [POWER] and [SELECT] at the same time. Before traveling, make sure to press [POWER] and wait for the
TRAV’LER antenna to stow. See page 6 for more information on stowing before traveling.
Operation | 4 |
