WARNING: Pay attention to these Pinch Points as the antenna raises!
Pinch Point
FIGURE 6 | FIGURE 7 |
Pinch Points
Pinch
Point
Using the (4) bolts and nuts provided, attach the reflector to the mounting bracket.
Press [POWER] to lower the antenna to the travel position. Note: The nuts securing the dish should be
tightened to
Receiver Setup:
If you are not able to see all of your channels or the receiver displays an error, it may be necessary to go through the receiver set up once the TRAV’LER has finished a successful search.
Please refer to your Receiver Manual to enter the Guided Setup, using five LNB
type.
!
!
DO NOT set the receiver for five LNB’s until the TRAV’LER indicates a successful search.
The 103 and 99 satellites will not be visible unless your reciever has the
Rev. 4/15/08
INSTALLATION | 8 |
