Wintal 720P manual Connection Diagram, Learning Key, Instructions to use the STB RCU learning keys

The Learning Key

Your PVR remote has four learning keys plus a self-coding function. The keys can be used for the STB remote to function as any of the four keys on your TV remote.

The recommended keys to use are “TV POWER”, the two grey keys below “TV POWER” ”TV/ AV”, and “SET”. The identification of ”TV/AV” key varies with the TV type. For example, identifying AV INPUT 1 2 3, etc.

You do not need to use your TV remote when watching the digital TV program and services once your PVR remote has been set up to turn on your TV and change to the correct AV channel.

Instructions to use the STB RCU learning keys:

1.Press and hold the “SET” key on your remote for three seconds, indicator light will keep on;

2.Aim your TV remote to the “receiving window” on the back of your PVR remote while pressing the key you want it to learn (eg. the Power button on your TV remote).

3.The indicator light of the STB RCU flashes three times, and it indicates that the STB RCU has received the signal from your TV remote;

4.And press corresponding learning key on “TV key” window of your PVR remote again (such as the TV power key), the indicator light will flash three times. This indicates that the key has been learnt successfully and is ready to use.

5.When pressing keys on the “TV key” section on your PVR remote, the indicator light will flash. This indicates that your PVR remote is sending control signals to your TV. It is the same as the VOL+, VOL- and TV/AV keys.

Appendix:

1.When watching TV pressing the “INFO” key on your remote will bring up the information of the current and next program, such as name, starting time and ending time. This message will disappear automatically after several seconds.

2.The description information of the current channel will be displayed on the screen for several seconds by pressing the “INFO” button again.

4. Connection Diagram

There are various ways to connect your PVR to your TV.

The recommended options to obtain high definition picture is via HDMI, followed by Component (YPbPr).

Important: To make use of the twin tuner functionality built-in to your PVR, you must ensure that you connect the supplied RF crossover lead from Loop Out 1 to Ant in 2.

A. Using HDMI Cable

HDMI is the recommended connection for your PVR (if you have a TV with an HDMI input). An HDMI connection will allow you to transmit 1080i digital video and digital audio signals using a single lead.

•Connect the antenna to ANT IN of the STB

•Connect one end of your HDMI lead to the PVR and the other end to the HDMI port on your TV.

10 11