Wolf CT30G dimensions Installation N O T E S

Models: CT30G

1 7
Download 7 pages 23.33 Kb
Page 5
Image 5

Planning Information

30" (762) Gas Cooktop

M O D E L C T 3 0 G

I N S T A L L A T I O N N O T E S

Refer to the illustrations and specifications for overall dimensions, cut-out dimensions and installation specifics.

Wolf recommends using a 33" (838) wide cabinet with the 30" (762) gas cooktop.

A Wolf downdraft system, Cooktop or Pro ventilation hood is recommended. When installing a ventilation hood, refer to the specific requirements of the hood for the minimum dimension to countertop. Also refer to the ventilation recommendation charts in the cooktop or Pro ventilation sections of our website, wolfappliance.com.

The Wolf 30" (762) gas cooktop requires a separate 120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker and a grounded 3-prong receptacle should be located within the reach of the

6' (1.8 m) power cord. Locate electrical within the shaded area shown in the illustration on page 4.

IMPORTANT NOTE: A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Wolf gas cooktops are designed to operate on natural gas at 5" (12.5 mb) WC (water column) pressure or LP gas at 10" (25 mb) WC pressure. The minimum line pressure for natural gas is 7" (17.5 mb) WC and 11" (27.4 mb) WC for LP gas. The maximum gas supply pressure to the regulator should never exceed 14"

(34.9 mb) WC; .5 psi (3.5 kPa). It is supplied with a 1/2" NPT male gas connection at the right rear bottom corner of the cooktop. The male connector exits the unit straight down and you are supplied with a regulator with two female connectors.

You must follow all National Electrical Code and gas regulations. In addition, be aware of local codes and ordinances when installing your services.

Wolf gas cooktops using natural gas function up to an altitude of 8,000' (2438 m) without any adjustment. Natural gas installa- tions from 8,000' (2438 m) to 10,000' (3048 m) need the high altitude conversion kit. LP gas installations will operate up to 10,000' (3048 m) without adjustment.

When a gas cooktop is installed above cabinets, placement of the electrical and gas supply is not critical. A grounded outlet needs to be placed within 4' (1.2 m) of the right rear of the cooktop.

A Wolf built-in single oven may be installed below this cooktop. For this installation, the electrical and gas supply for the cooktop should be installed in the adjacent cabinet. Refer to page 6 for specifications. Be aware of the depth of the cooktop when planning for this installation.

IMPORTANT NOTE: When a built-in oven is installed below the cooktop, unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in an adjacent cabinet within reach of the conduit.

IMPORTANT NOTE: Wolf gas cooktops are designed and agency approved for installation with Wolf built-in ovens only.

When multiple cooktop units are installed side by side, refer to the countertop cut-out dimensions on page 7.

Refer to the installation instructions shipped with each Wolf product for detailed specifications.

This cooktop is intended for indoor use only.

Dimensions in parentheses are in

millimeters unless otherwise specified.

5

Page 5
Image 5
Wolf CT30G dimensions Installation N O T E S

CT30G specifications

The Wolf CT30G is a high-performance gas countertop combination oven that blends the functions of a conventional oven and a convection oven, making it a versatile choice for both professional kitchens and serious home cooks. With its sleek design, robust construction, and advanced features, the CT30G is designed to deliver exceptional cooking results while offering ease of use and reliability.

One of the standout features of the Wolf CT30G is its powerful dual convection heating system. This technology ensures even baking and roasting by circulating heated air around the food, resulting in consistent temperatures and browning. The oven’s dual fans promote excellent airflow, which is crucial for achieving restaurant-quality meals.

The CT30G also boasts precise temperature control, with a temperature range that typically spans from 150°F to 500°F, allowing for extensive cooking capabilities including braising, roasting, baking, and proofing. The intuitive control interface features a digital display that provides precise temperature settings and cooking times, ensuring that chefs can focus on other aspects of meal preparation.

Another important characteristic of the Wolf CT30G is the integrated meat probe. This feature allows cooks to monitor the internal temperature of meats without opening the oven door, helping to avoid heat loss and ensuring perfectly cooked dishes every time. The probe is especially beneficial for larger cuts of meat, where precise timing is critical.

The design of the Wolf CT30G emphasizes easy cleaning and maintenance. The oven is equipped with a self-cleaning mode that simplifies the cleaning process, making it convenient for busy kitchens. Additionally, the oven’s interior is constructed from durable stainless steel, which resists stains and is easy to wipe down after use.

Safety is paramount in the CT30G’s design, incorporating features such as a safety shut-off and cool-touch handles, which prevent burns and mishaps during operation. Moreover, the oven's robust construction is designed to withstand the rigors of daily use in fast-paced culinary environments.

In summary, the Wolf CT30G gas countertop combination oven is a blend of technology, performance, and style. With its dual convection capabilities, precise temperature control, integrated meat probe, easy cleaning features, and safety mechanisms, it stands out as a reliable and powerful tool for culinary professionals and enthusiasts alike, delivering excellence in every dish.