Wolf ICBCT36EU, ICBCT30EU, ICBCT15E Installation Specific Ations Model ICBCT36E

WOLF E L E C T R I C CO O K TO P S

FRAMED M O D E L I C B C T 3 6 E

The illustrations below provide installation specifications for Model ICBCT36E.

For ease of installation, 991 mm cabinets are recommended for installation of Model ICBCT36E.

A Wolf 762 mm or 914 mm built-in single oven may be installed below Model ICBCT36E. For this installation, unless you are using cabinets deeper than 610 mm, it is recommended that the electrical supply be placed in the base cabinet to the right of the oven.

Refer to installation instructions provided with the built-in oven for additional specifications.

If Model ICBCT36E is installed above cabinets, the electrical placement is not critical. A grounded electrical box should be located within 1.2 m of the right rear of the cooktop.

IMPORTANT NOTE: Do not block the cooling fan located at the bottom of the cooktop.

INSTALLATION SPECIFIC ATIONS – MODEL ICBCT36E
	533 mm
	OVERALL
	DEPTH
914 mm						991 mm
OVERALL WIDTH		330 mm						762 mm
						RECOMMENDED CABINET WIDTH
			max	457 mm	51 mm*min	914 mm min		COUNTERTOP TO
		51**	489 mm		CUT-OUT TO	873 mm		COMBUSTIBLE
					COMBUSTIBLE			MATERIALS
		mm COOKTOP CUT-OUT		64 mm
96 mm	127 mm				MATERIALS	COOKTOP CUT-OUT WIDTH		ABOVE COOKTOP
			DEPTH	min	(BOTH SIDES)
TERMINAL BOX						102 mm
Overall Dimensions						89 mm	E
						95 mm	254
			610 mm min	914 mm		min
							mm
				STANDARD
				FLOOR TO
				COUNTERTOP		914 mm OVEN OPENING
MODEL ICBCT36E				HEIGHT
Overall Width	914 mm
Overall Height	96 mm
Overall Depth	533 mm	*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 457 mm above countertop. **Minimum clearance from
Minimum Cabinet Depth	578 mm	rear edge of cooktop cut-out to combustible materials up to 457 mm above countertop.
Minimum Height Clearance*	102 mm					873 mm
						COOKTOP CUT-OUT WIDTH
Cut-Out Width	873 mm	Countertop Cut-Out
Cut-Out Depth	489 mm

*Minimum 146 mm clearance is required		489 mm
between countertop and any combustible	64 mm	COOKTOP
		CUT-OUT DEPTH
surface directly below the cooktop.	min

For detailed terminal block dimensions, refer to the illustration on page 7.

FRONT OF COUNTERTOP

Dimensions may vary to ± 3 mm.

10