Wolf ICBCT36EU, ICBCT15E installation instructions Installation Specific Ations Model ICBCT30EU

WOLF E L E C T R I C CO O K TO P S

UNFRAMED M O D E L I C B C T 3 0 E U

The illustrations below provide installation specifications for Model ICBCT30EU.

For ease of installation, 838 mm cabinets are recommended for installation of Model ICBCT30EU.

AWolf 762 mm built-in single oven may be installed below Model ICBCT30EU. For this installation, unless you are using cabinets deeper than 610 mm, it is recommended that the electrical supply be placed in the base cabinet to the right of the oven. Refer to instal- lation instructions provided with the built-in oven for additional specifications.

If Model ICBCT30EU is installed above cabinets, electrical placement is not critical. A grounded electrical box should be located within 1.2 m of the right rear of the cooktop.

For Model ICBCT30EU installation options, refer to Unframed Installations on pages 14–15.

IMPORTANT NOTE: For flush mount applica- tions, it is recommended to measure the cooktop glass before cutting the countertop to ensure a proper fit. Small variances may exist between the template and the cooktop.

INSTALLATION SPECIFIC ATIONS – MODEL ICBCT30EU

					533 mm
					OVERALL
					DEPTH
			762 mm
		OVERALL WIDTH
108 mm					140 mm
		TERMINAL BOX
	Overall Dimensions
	MODEL ICBCT30EU
	Overall Width			762 mm
	Overall Height			108 mm
	Overall Depth			533 mm

330 mm
max	457 mm
SEE COUNTERTOP
CUT-OUT BELOW
102 mm min
610 mm min	914 mm
	STANDARD
	FLOOR TO
	COUNTERTOP
	HEIGHT

		838 mm RECOMMENDED
						762 mm
51 mm*min				CABINET WIDTH
				762 mm min	COUNTERTOP TO
CUT-OUT TO						COMBUSTIBLE
COMBUSTIBLE			SEE COUNTERTOP			MATERIALS
	MATERIALS			CUT-OUT BELOW	ABOVE COOKTOP
(BOTH SIDES)

114 mm

89 mm E

102 mm
	254
min		mm
TO OVEN
OPENING

762 mm OVEN OPENING

Minimum Cabinet Depth	578 mm
Minimum Height Clearance*	114 mm
Cut-Out Width	721 mm
Cut-Out Depth	492 mm

*Minimum 159 mm clearance is required between countertop and any combustible surface directly below the cooktop.

For detailed terminal block dimensions, refer to the illustration on page 7.

*Minimum clearance from both side edges and back edge of cooktop cut-out to combustible materials up to 457 mm above countertop.

765 mm**

Countertop Cut-Out RECESSED AREA FOR

FLUSH MOUNT INSTALLATION ONLY

	RECESSED AREA FOR				33 mm		721 mm COOKTOP
FLUSH MOUNT INSTALLATION ONLY					RADIUS			CUT-OUT WIDTH
	COUNTERTOP									51 mm*
	22 mm	PROFILE						11 mm RADIUS
				537 mm**
	max			RECESSED AREA						492 mm
				FOR FLUSH MOUNT						COOKTOP
				INSTALLATION ONLY					CUT-OUT DEPTH
						40 mm
			8 mm

Dimensions may vary to ± 3 mm.

**Minimum dimension, but may be exceeded by up to 3 mm.

FRONT OF COUNTERTOP

62 mm

12