Wolf ICBIG15 I L L M O D U L E O P E R At I O N, F O R E U S I N G F O R T H E F I R S T T I M E

WO L F G R I L L M O D U L E U S E & C A R E

G R I L L M O D U L E O P E R AT I O N

B E F O R E U S I N G F O R T H E F I R S T T I M E

Wash the grilling grate, grease deflection plates and grease collection pan in warm soapy water. This removes any residual oil and grease left on the surface from the manufactur- ing process. The electric grill module must be reassembled in the correct alignment as shown on page 9.

Refer to Care Recommendations on page 15. Apply a stainless steel polish to protect the finish and add luster.

Allow a burn-in period of approximately 10 minutes before use. During the initial period of use, you may smell a light burning odor or see light smoke. Both these conditions are normal with a new grill module.

C O N T R O L O P E R AT I O N

The Wolf electric grill module operates by automatically cycling the heating elements between zero power and full power. As the heat is increased on the control panel, the element will stay at full power for longer periods and have shorter periods of zero power.

M O D E S O F O P E R AT I O N

L O C K M O D E

In Lock mode, all touch pad operations on the control panel are disabled and the heating element is deenergized. A steady glowing light

in the touch pad indicates that the unit is locked. Refer to the illustration below for

location of the touch pad.

To lock the control panel, touch and hold

the symbol for 3 seconds. The unit will beep three times and the light in the

touch pad will illuminate. The control unit is now in Lock mode.

To unlock the control panel, touch and hold

the symbol for 3 seconds. The unit will beep twice and the light in the touch pad will go out. The control unit is now in Idle mode.

IMPORTANT NOTE: When the unit is powered up for the first time or if there has been a power outage, the grill module will default to Lock mode.

I D L E M O D E

After unlocking the control panel as described in Lock Mode, the unit enters the Idle mode of operation. The valid touch pad operations are

,	, ”+” or ”–” and the Lock mode
	.

	LED display	Power indicator	Temperature		Timer LED
indicator lights		bar graph		adjustment		display

Lock ”key”	SELECT	OFF ON	CLEAR
touch pad	touch pad	touch pad	touch pad

Touch control panel

10