Wolfgang Puck BECP0030 Know Your Cookie Press Storage Box Assembly Instructions

HSN_CookiePressManual10 8/4/10 10:34 PM Page 7

Know Your Cookie Press

Storage Box

Assembly Instructions

1Align the arrows on the Cam Disc

with the arrows on the Motor Body (See Figure 1).

2Attach Press Disc to the Cam Disc

by inserting stem of the Cam Shaft into

Tube Pastry Tips Cookie Discs

Figure 1

the Cam Disc’s center hole. Fit the Shaft all the way inside the unit. Press firmly then turn clockwise. You will hear a click as it snaps in place (See Figure 2).

Motor

Body

Locking

Place cover on box and press the four locking tabs down to until they click into place

Photo above may differ slightly from actual product

3			The outside contours of the 2 Discs will
			line up (See Figure 3).
		NOTE: Turn Cam Disc one click counter-
		clockwise if Shaft is difficult to insert into
		Motor Body.
		4	Select a Disc and place it inside the
	Figure 2		Tube Cover. Then place the Tube Cover
			onto the Tube, turning clockwise until
			locked (See Figure 4).
		5 If a Pastry Tip is to be used, refer to
			Figure 5 and fit the desired Tip over the
			Pastry Tip Adapter and secure it with
			the Pastry Tip Cover. Place the Pastry
			Tip Assembly inside the Tube Cover.
			Then place the Tube Cover onto the
	Figure 3		Tube turning clockwise until locked.
		6 With a spoon or spatula, load freshly
			prepared cookie dough or filling.
		NOTE: To ensure proper operation, do not
		fill the Tube past the MAX Fill Line. DO NOT
		OVERFILL!

Figure 4

7 8