Woods Equipment 2100042 installation manual Mount Installation, Install Grill Guard

Install Grill Guard

1.Attach grill guard mounting brackets (B) to the right and left sides of the tractor frame. Secure to each side using two cap screws (C), hardened flat washers (D), and hex nuts (E).

2.Slide grill guard (A) over outside of mounting brackets and insert lower bar into slots.

3.Secure into position using two (one per side) clevis pins (F) and klik pins (G).

4.Remove grill guard (A) whenever hood is raised for maintenance.

5.Torque the cap screws (C) in the tractor frame to 85 lbs-ft (115 N-m).

A.-------- Grill guard

B.1029397 Mounting brackets

C.3379 1/2 NC x 1-1/2 HHCS GR5

D.57816 1/2 Hardened flat washer

E.1093 1/2 NC Hex nut

F.16120 3/8 x 1-1/4 Clevis pin

G.22411 3/16 x 1 Klik pin

Figure 3. Grill Guard Installation

6 Mount Installation MAN0728 (8/15/2008)