SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

BE CAREFUL!

Use a clean, damp cloth to clean safety decals.

Avoid spraying too close to decals when using a pressure washer; high-pressure water can enter through very small scratches or under edges of decals causing them to peel or come off.

Replacement safety decals can be ordered free from your Woods dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319-6637.

MODEL NO.

SERIAL NO.

 

Woods Equipment Company

 

Oregon, Illinois, U.S.A.

2 - SERIAL NUMBER PLATE

(Located on back side of blower housing)

WARNING

THROWN OBJECT HAZARD CAN RESULT IN

SERIOUS INJURY OR DEATH.

NEVER OPERATE WITHOUT DISCHARGE CHUTE OR ENTIRE GRASSCATCHER

SYSTEM IN PLACE.

72672

1 - PN 72672

DANGER

￿￿￿￿￿SHIELD￿￿￿￿￿￿￿MISSING￿￿￿￿￿￿￿￿￿￿￿￿￿

3 - PN 18869

18869

CD6274

3

2

1

6 Safety

MAN0258 (Rev. 12/14/2007)

 

 

Page 6
Image 6
Woods Equipment MX54, MX61 manual Safety & Instructional Decals, Be Careful, Located on back side of blower housing