Under certain conditions, tractor tires may roll some grass down and prevent it from being cut at the same height as the surrounding area. When this occurs, reduce your ground speed, but maintain PTO at 540 rpm. The lower ground speed will permit grass to par- tially rebound.
In general, lower cuttingheights give a more even cut and leave less tire tracks. However, it is better to cut grass frequently rather than too short. Short grass deteriorates rapidly in hot weather and invites weed growth during growing seasons. Follow local recom- mendations for the suitable cutting height in your area.
Inspect and clear area of stones, branches, or other hard objects that might be thrown, causing injury or damage.
Extremely tall material should be cut twice. Set mower at a higher cutting height for the first pass. Then cut at desired height, 90 degrees to the first pass.
Remember, sharp blades produce cleaner cuts and require less power.
Analyze area to be cut to determine the best proce- dure. Consider height and type of grass and terrain type: hilly, level, or rough.
Plan your mowing pattern to travel straight forward whenever possible. Mow with uncut grass to the right. This will distribute the clippings over the cut area.
Uneven Terrain
Do not operate or transport on steep slopes.
Do not stop, start, or change directions sud- denly on slopes.
Use extreme care and reduce ground speed on slopes and rough terrain.
Watch for hidden hazards on the terrain during operation.
Pass diagonally through sharp dips and avoid sharp drops to prevent hanging up tractor and mower.
Practice will improve your skills in maneuvering rough terrain.
Removing Mower from Tractor - Storage
Follow cleaning procedure, page 16.
1.Disengage tractor PTO and raise mower with the
2.Disconnect mower driveshaftfrom tractor PTO.
3.Collapse driveshaft as far as possible and store it in PTO hanger bracket to prevent ground contact.
4.Place blocks under mower side skids. Lower mower onto blocks, disconnect mower from tractor
Keep children and bystanders away from stor- age area.
Figure 6. Mower Storage Position
MAN0260 (8/6/2004) | Operation 11 |
|
|
