Woodstock D3736 owner manual Maintenance, General, Keeping Tool Clean

Model D3736 Palm Finishing Sander

MAINTENANCE

General

Regular periodic maintenance on your Model D3736 Palm Finishing Sander will ensure its optimum performance. Make a habit of inspecting your sander each time you use it. Check for the following conditions and repair or replace when necessary:

•ExtraCoarse. Loose fasteners.

•ExtraCoarse. Worn switch.

•ExtraCoarse. Worn or damaged cords and plugs.

•ExtraCoarse. Worn or damaged sanding pad.

•ExtraCoarse. Any other condition that could hamper the safe operation of this tool.

Keeping Tool Clean

Your Model D3736 Palm Finishing Sander will give you years of trouble free service if you keep it clean and free of built-up dust or grime. Ensure that no air passages get blocked. If they do, blow them out with compressed air.

CAUTION: Unprotected eyes can be injured by dust particles propelled by compressed air. ALWAYS wear safety glasses and a dust mask when cleaning the sander with compressed air.

Plastic parts can easily be cleaned with a damp cloth, but never use water to clean any electrical parts. Solvents should also be avoided on plastic because of the possibility of damage.

If possible, use a scraper to remove glue or sap from your work; these elements may hinder the effectiveness of the abrasive sheets and cause unnecessary build-up of grime on the sander.

-8-