Model D3736 Palm Finishing Sander
-1-
SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous
conditions. This manual uses a series of sy mbols and signal words which are intended
to convey the level of importance of the safety me ssages. The progression of
symbols is described below. Remember that s afety messages by themselves do not
eliminate danger and are not a substitute for proper accident prevention mea sures.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates an imminently hazardous situation w hich, if
not avoided, WILL result in death or serio us injury.
NOTICE This symbol is used to alert the user to useful
information about proper operation of the
equipment.

Safety Instructions for Machinery

1. READ THROUGH THE ENTIRE
MANUAL BEFORE STARTING
MACHINERY. Machinery presents
serious injury hazards to untrained
users.
2. ALWAYS USE ANSI APPROVED
SAFETY GLASSES WHEN
OPERATING MACHINERY. Everyday
eyeglasses only have impact resis-
tant lenses, they are NOT safety
glasses.
3. ALWAYS WEAR A NIOSH APPROVED
RESPIRATOR WHEN OPERATING
MACHINERY THAT PRODUCES
DUST. Wood dust is a carcinogen
and can cause cancer and severe
respiratory illnesses.
4. ALWAYS USE HEARING
PROTECTION WHEN OPERATING
MACHINERY. Machinery noise can
cause permanent hearing damage.
5. WEAR PROPER APPAREL. DO NOT
wear loose clothing, gloves, neck-
ties, rings, or jewelry which may
get caught in moving parts. Wear
protective hair covering to contain
long hair and wear non-slip foot-
wear.
6. DO NOT USE UNDER INFLUENCE OF
DRUGS OR ALCOHOL.