Model D3756
Dust Collection Accessories Kit
Instruction Sheet
Phone #: (360)
Identification & Inventory
Refer to Figure 1 and the descriptions below to identify and inventory your new dust collection accessories kit.
A.Clear Tube: Connects the floor scoop to a dust hose and the dust collection system.
B.Blast Gate: Opens or seals the opening to the dust collection system.
C.Clamping Handle: Provides a method to control the floor scoop assembly.
D.Straight Adapter: Connects two 4" dust collection accessories.
E.
F.Wall Mounting Clamps: Secures a dust hose or the floor scoop assembly on the wall for storage.
G.Dust Hose Adapter: Connects a 4" dust accessory to a 4" dust hose.
H.Floor Scoop: Provides a convenient way to clean chips and dust from the floor.
Operation
For a convenient method of cleaning wood chips and dust from the floor, assemble the parts as shown in Figure 2, and connect
a 4" dust hose between this assembly and your dust collection system.
Figure 2. Floor scoop configuration.
To clean wood chips and dust from work- benches and tables, connect the hand-held brush assembly directly to a dust hose, as shown in Figure 3.
A
C
E
B
D
H
G
F
Figure 3. Hand-held brush configuration.
Important: For safe and efficient opera- tion of these devices, connect them, with
Figure 1. Shipping inventory.
a grounding wire for static electricty, to a dust collection system that provides at least 400 CFM of suction.
COPYRIGHT © JUNE, 2010 BY WOODSTOCK INTERNATIONAL, INC.
| WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT | |
#12985TS | THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. | Printed in Taiwan |
