Woodstock D4041 instruction sheet

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China#13127TR

1. MITER SAW SAFETY. Follow all safety instruc-

tions in the miter saw manual.

2. MITER SAW WORK STAND SET UP. Make sure

the leg locking pins are fully snapped into

place before mounting the miter saw.

3. MITER SAW WORK STAND PLACEMENT. Only

operate the miter saw work stand on a hard,

flat, and level surface. DO NOT set up the

miter saw work stand on a soft surface, such

as sand or mud.

4. MITER SAW WORK STAND USAGE. Only use

the miter saw work stand to support a miter

saw. This stand is NOT intended for use as a

ladder or scaffolding.

5. WORKPIECE BALANCE. Use extra support

tables, or get assistance, when working with

large workpieces to prevent the stand from

tipping over.

6. ATTACH MITER SAW SECURELY. DO NOT

operate the miter saw unless it is securely

attached to the miter saw work stand.

7. LOCK WORK SUPPORTS. Tighten lock knobs

to secure the work supports before using the

miter saw work stand.

8. EXPERIENCING DIFFICULTIES. If at any time

you are experiencing difficulties performing

the intended operation, stop using this stand!

Contact Tech Support at (360) 734-3482 for

help.

Model D4041Miter Saw Stand

Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz

The Model D4041 Miter Saw Work Stand (Figure 1)

features a universal, adjustable T-track mounting system

for securing miter saws without modification. Laterally

and vertically adjustable ball bearing rollers on each

end of the stand support long workpieces. Roller mounts

rotate incrementally for fine height adjustment. Folding

legs and rubber wheels make this work stand portable.

This item was carefully packaged for safe transportation.

If you notice that it was damaged during shipping, please

contact your Shop Fox dealer immediately.

Figure 1. Model D4041.