Woodstock instruction sheet Model D4137 HP 110V Magnetic Switch, Instruction Sheet, Color KEY

Model D4137

2 HP 110V Magnetic Switch

Instruction Sheet

Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz

Figure 1. Model D4137 magnetic

switch.

Electrocution or fire could occur if this switch is not installed or adjust- ed by a qualified electrician!

Contactor TECO CU-16

(110V Coil)

COLOR KEY

BLACK Bk

GREEN Gn

RED Rd

YELLOW

Thermal Overload

Relay TECO RHN-10K

(22–30A)

110 Volt

Single-Phase

Power Source

1L1	3L2	5L3	13NO
TECO					NO
					53
					Ground
CU-					ON
16					54
					NO
2T1	4T2	6T3	14NO
TRIP IND.
					M
TEST			O	R	A
		OFF		RESET
97 NO	98 NO	95 NC		96 NC
2T1	4T2		6T3

2 HP 110V Motor

IMPORTANT: This magnetic switch toggles a motor ON and OFF, and helps provide thermal overload protection for the motor if the operating temperature gradually increases due to heavy work loads. The thermal overload relay inside is not designed to cut power in the event of a sudden motor overload or stall. To help protect a motor from this type of overload, the power supply circuit must be properly sized for the full-load current rating of the motor.

OPERATION: When pushed, the green ON button on the outside cover of the magnetic switch allows current to flow to the magnetic coil, which pulls the contactor closed. The main current then passes through the thermal overload relay to the motor. If the motor begins to overheat, the relay breaks the magnetic field, which opens the contactor and cuts current to the motor. The red OFF button manually breaks the magnetic field, which opens the contactor and disconnects the current to the motor.