Woodstock M1106, M1104, M1105 owner manual Test Run, To perform a test run, do these steps

M1104, M1105, M1106 Heavy-Duty Bench Grinder

Test Run

SET UP

Once your machine is mounted and assembled, you should perform a test run to make sure it works properly.

To perform a test run, do these steps:

1.Make sure all tools are removed from the grinder area.

2.Make sure the switch is in the OFF position.

3.Plug the grinder into the power source.

4.Turn the grinder ON. Under normal conditions, the grinder will make a humming noise, with only minor vibration.

—If you suspect any problems, immediately turn the grinder OFF and refer to Page 15 to trouble- shoot and correct any problems before starting the grinder again.

—If the source of an unusual noise or vibration is not readily apparent, contact our technical support for help at (360) 734-3482 or contact us online at tech-support@shopfox.biz.

DO NOT investigate problems or adjust the Heavy-Duty Bench Grinder while it is running. Wait until the machine is turned OFF, unplugged and the spindle has come to a complete stop before proceeding!

-10-