SAFETY PRECAUTIONS 
MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.
AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.
•Machinery should be operated only by those who are responsible and are authorized to do so.
•Stop the engine, lower all equipment, lock the brakes, and remove the ignition key before dismounting from the tractor.
•Never stand between tractor and implement while tractor is being backed to hitch.
•Loose fitting clothing should not be worn, to avoid catch- ing on various parts.
•Detach implement in area where children normally do not play.
•When performing adjustments or maintenance on an implement, first lower it to the ground or block it securely at a workable height.
•Only a qualified operator should be permitted on tractor when in operation; no riders allowed.
•Make certain everyone is in the clear before starting tractor or raising or lowering equipment.
•Operate the tractor and implement only while seated in the driver’s seat.
•Reduce speed when transporting mounted implements to avoid bouncing and momentary loss of steering control.
•A heavy load can cause instability of the tractor. Use extreme care during road travel. Slow down on turns and watch out for bumps. Tractor may need front counter- weights to
•Reduce speed on hillsides or curves so there is no danger of tipping.
•Avoid driving too close to the edge of ditches or creeks.
•Do not transport implement on public roads without reflectors and slow moving vehicle emblem in daylight and with approved warning lights at night and other periods of poor visibility.
•Due to the width of some implements, use extra caution on highways, farm roads, and when approaching gates.
•Always be sure the implement is in the proper position for transport.
•Keep alert and watch the front as well as the rear when working with the implement.
OWNER’S /
OPERATOR’S
MANUAL
MODEL NO.
300
SINO LEEINGLES, PIDA AYUDA A AIGUIEN QUE SI LO LEA PARA QUE LE TRADUZCA LAS MEDIDAS DE SEGURIDAD.
JANUARY 2004
LIGHT DUTY
POST HOLE DIGGER
For small 14 - 24 hp tractors with Cat. 0
(with 7/8” Cat. I Pins)
WHEN ORDERING REPAIR PARTS,ALWAYS GIVE THE FOLLOWING INFORMATION:1.PART NUMBER
2.PART DESCRIPTION
3.MODEL NUMBER
4.NAME OF ITEM
MAKE EVERY DAY
AHOLIDAY FROM ACCIDENTS!
WORKSAVER, INC.
| P.O. BOX 100 LITCHFIELD, IL |
WEB: http:// www.worksaver.com |
