OPERATION INSTRUCTIONS (continued)

If auger becomes lodged below ground, DO NOT attempt to lift auger out of ground by hydraulic lift power alone. Turn tractor off and disconnect PTO driveline from the tractor. Reverse the rotation of the auger by several turns. This can be accomplished by using a large pipe wrench and screwing the auger backwards until it clears. Extreme rocking or lifting loads while trying to clear stuck augers can cause auger, gearbox, or boom failure.

TRANSPORTING

Pay particular close attention to the Safety Messages regarding transport. Avoid unnecessary injuries and equipment damage by exercising cautious, conscientious travel procedures.

Attaching the implement to the tractor increases the overall length of the working unit. Allow additional clearance for the implement to swing when turning.

CAUTION!

Do not attempt to free the auger while the PTO is connected. Disconnect the PTO driveline from the tractor before attempting to free the auger.

CAUTION!

When traveling on public roads, whether at night or during the day, use accessory light and devices for adequate warnings to operators of other vehicles. Comply with all federal, state and local laws.

CAUTION!

Underground utilities – Contact appropriate agencies to determine if hazardous items are buried under the digging site BEFORE DIGGING! Be certain underground utilities have been called to locate underground electric, gas, telephone, and other lines. Check your telephone book for calling instruc- tions. Be sure post hole digger operator is properly informed. WHEN IN DOUBT, DO NOT DIG!

NOTE: Never exceed the recommended auger capacity of the post hole digger. The Model 300 heavy duty digger is designed for use with augers up to 12-inch diameter. Use of an incorrect auger or auger extension can cause equipment damage, loss of operator control and personal injury.

Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by a single careless act of an operator.

It has been said, “The best safety device is an informed, careful operator.” We ask you to be that kind of an operator.

DO NOT OPERATE PTO DURING TRANSPORT.

Raise the post hole digger as high as possible for transporting.

Select a safe ground travel speed when transporting from one area to another. When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely.

When traveling over rough or hilly terrain or when mak- ing turns, slow down and use extra care.

Read all safety warnings in the front of the manual.

OBEY SAFETY

RULES!!

ALWAYS BE

CAREFUL!!

17

Page 17 Page 19
Page 18
Image 18
Worksaver 300 operating instructions Obey Safety Rules Always be Careful, Transporting, Do not Operate PTO During Transport
Page 17 Page 19

300 specifications

The Worksaver 300 is a cutting-edge piece of equipment designed to meet the needs of modern agricultural and industrial applications. Renowned for its versatility and efficiency, the Worksaver 300 is engineered to optimize productivity while ensuring ease of use. This powerful machine is equipped with a myriad of features that set it apart in the marketplace.

One of the standout features of the Worksaver 300 is its robust engine, which delivers impressive horsepower to tackle heavy loads with ease. This engine is not only powerful but also fuel-efficient, making it a cost-effective choice for users who need to manage operational expenses. Coupled with an advanced transmission system, the Worksaver 300 provides smooth shifting and optimal power delivery, ensuring that it can handle a variety of tasks, fromlifting to heavy-duty towing.

The Worksaver 300 is also equipped with an innovative hydraulic system that offers superior lifting capabilities. This system is designed to enhance the machine's versatility, allowing operators to easily switch between various attachments, such as loaders, backhoes, and other implements. The user-friendly controls make it easy for operators of all skill levels to manage attachments effortlessly, increasing efficiency on the job site.

In terms of technology, the Worksaver 300 incorporates state-of-the-art sensors and monitoring systems that provide real-time feedback to the operator. These features enhance safety by alerting the operator of any potential issues or irregularities, significantly reducing the risk of accidents or equipment failure. Additionally, the Worksaver 300 is designed with a rugged chassis and durable components, ensuring that it can withstand the rigors of demanding work environments.

The machine's ergonomic design prioritizes operator comfort, equipped with a spacious cabin that offers excellent visibility and reduced noise levels. Adjustable seating and intuitive controls further enhance the user experience, making long hours of operation less taxing.

In summary, the Worksaver 300 combines power, versatility, and cutting-edge technology to deliver an exceptional user experience. With its strong engine, flexible hydraulic system, and advanced safety features, it is an ideal choice for those in need of a reliable workhorse for agricultural and industrial applications. Whether you are lifting, towing, or operating different attachments, the Worksaver 300 stands out as a top-tier solution in its class.
Top Page Image Contents