SAFETY INSTRUCTIONS (continued)
OPERATIONAL SAFETY (continued)
Allow for additional length of loader and bale on tractor while turning.
Never allow anyone to walk or work under a raised loader. Do not use loader for a work platform. Do not lift or carry anyone on loader or in bucket or on attachment.
Set both front and rear tractor wheels wide for increased stability.
Be sure that people, livestock, or pets are not standing near the machine while operating.
ALWAYS lower loader to the ground or block securely before performing any maintenance work.
Stay alert for holes, rocks and roots in the terrain and other hidden hazards. Keep away from
Use extreme care and maintain minimum ground speed when transporting on hillside, over rough ground and when operating close to ditches or fences. Be careful when turning sharp corners.
Reduce speed on slopes and sharp turns to minimize tipping or loss of control. Be careful when changing directions on slopes. Do not start or stop suddenly on slopes. Avoid operation on steep slopes.
When using a unit, a minimum 20% of tractor and equipment weight must be on tractor front wheels. Without this weight, tractor could tip over, causing personal injury or death. The weight may be attained with a front end loader, front wheel weights, ballast in tires of front tractor weights. When attaining a minimum 20% of tractor and equipment weight on the front wheels, you must not exceed the ROPS weight certification. Weigh the trac- tor and equipment. Do not guess or estimate!
Avoid excessive speed during operation.
ALWAYS lower spear points to the ground when parking tractor. Raised spear points could cause injury to people or livestock.
Always shut off tractor and shift to “Park” or set brakes when leaving tractor. Always lower bucket or attachment to ground. Remove key when leaving tractor unattended.
Before operating equipment: if you have any questions regarding the proper assembly or operation, contact your dealer or representative.
9
