Worksaver Safety Signs, Be Careful, Remember, For models JDBS-423, JDBS-434, JDBS-433

SAFETY SIGNS

(For models JDBS-412, JDBS-423, JDBS-434

and JDBS-433)

WARNING

Always insert spears in bale – never under bale.

Failure to do this can allow bale roll back when loader is raised, causing serious injury or death.

101127

(For models JDBS-423, JDBS-434, JDBS-433,

JDBS-623, JDBS-633 and JDBS-634)

BE CAREFUL!

Use a clean, damp cloth to clean safety decals. Avoid spraying to close to decals when using a pressure washer; high-pressure water can enter through very small scratches or under edges of decals causing them to peel or come off.

REMEMBER:

If Safety Signs have been damaged, removed, become illegible or parts replaced without Signs, new Safety Signs must be applied. New Safety Signs are available from your authorized distributor or factory.

13