Wyse Technology V90L/LE manual Replace the top cover and attach the vertical foot

4

6.Install the 1-GB or 2-GB flash module into the location of the original module making sure to align the plastic tab of the module’s connector with the notch in the connector on the board.

Warning

The flash module may be susceptible to damage by Electro-Static Discharge (ESD). All industry-standard cautions should be followed to avoid ESD.

7.Replace the top cover and attach the vertical foot.

8.Reconnect the video display, keyboard, mouse, and power adapter to the thin client before connecting to your electrical outlet (do not connect the thin client to the network); then press the power button on the thin client to begin the installation process (this will take a few minutes). During the installation process several windows will open and close automatically.

Warning

Do not interrupt the installation process.

9.After the installation process is complete, the thin client will automatically restart to the operating system. Connect the thin client to the network and then manually restart the thin client.

10.Proceed to “Verifying the Thin Client’s Operation.”