Xantech RC68+ Command Definitions, Pages that follow Following list itemizes and de

COMMAND DEFINITIONS

• For detailed information that defines the button commands relating to each overlay, refer to the Installation Instructions that come with each specific Xantech model.

• The only exception to this is for the model ZPR68; complete command definitions for it are included on

the pages that follow.						1								1
The following list itemizes and de-
scribes the full set of button commands	18											2
for operation of the ZPR68 and ZPR68-
								A
10 Six Zone Eight Source Preamp as			A		B			C	ADJ-OFF
	17		80	48		10			90		01
well as the IR Code Group setting		00			C0	50				D0	41
		1		2		3			4
switches that affect all RC68+ con-												3
		5			6 INPUT 7				8
	16		40		A0		30			B0	21	4
trolled models.
						GLOBAL
			20		E0	70				F0	61			Rear
1. IR Emitter Lens.	15	TREBLE BASS					Z-ADJ			VOL			5
		60		88		18				98	09

2.ADJ-OFFbutton. Provides in- stant turnoff of the TRIM and Z- ADJ modes on the ZPR68. TRIM and Z-ADJ will also turn off auto- matically 10 seconds after the last button press.

3.INPUT Select buttons. Press these to select up to 8 audio/ video sources on the Xantech controlled unit (where applicable). Also, on the ZPR68, pressing any INPUT button turns the addressed zone ON.

14							MUTE
		08			A8		38	B8	29
							ON	OFF
13
		28			E8		78	F8	69
	E-FLAT			LAST		MAX-V		TRIM
12
		68			C8		58	D8	49
		OFF					C-BAL
11
			E1	89			C9	A9	E9
		71		19			59	39	79
			F1	99			D9	B9	F9

Front

RC68+ PROGRAMMER

6

7

8

9

10

		8		9	A					8		9	A
		7								7
5	6				B			5	6				B
						C								C
							D								D
4						E		4						E
3								3
		2			F					2			F
		1	0							1	0

CODE GROUP

			8	9 A			8	9 A
	6		78	9	B		78	9	B
5		6	7		AB	56	67		A
					C				BC
45					C	45			C
43					D	43			D
32					E D	32			ED
			21	0	F E		21		FE
					F			0 F
			1	0			1	0

19

20

4. GLOBAL button. After pressing

this button (within 5 seconds) all	FIG. 3 RC68+ Itemized Functions and Features
subsequent commands for the

ZPR68 (i.e. INPUT, VOLUME, MUTE, BASS, and TREBLE) will be applied to all zones, in addition to the addressed zone, from any zone location.

5.VOLUME Up/Down buttons. When pressed, volume will increase and decrease in 2 dB steps between 0 dB and -80 dB (on remote preamps only. See applicable Installation Instructions for specific attenuation details when controlling remote autoformer volume controls, etc.). When buttons are held down, the volume level will change continuously.

6.MUTE ON / OFF buttons. Separate On / Off buttons, on applicable models, give positive mute commands without knowing what the status is. This is very helpful in a remote room when all adjustments are made “blind” without any visual aids for status.

NOTE: Mute is released (turned off) when a VOLUME, INPUT, BALANCE, BASS or TREBLE button is pressed (where applicable), in addition to MUTE OFF.

7.TRIM button. Activates the Input Level Trim adjustment mode on the ZPR68. This allows level trimming of each input on the ZPR68 so that all sources will sound equally loud when switching from one to the other (see the ZPR68 instructions for details). The TRIM adjustment mode will turn off automatically 10 seconds after the last button press - or it can be instantly defeated by pressing the ADJ-OFF button (2).

8.MAX-Vbutton. Saves the maximum desired volume level for the zone when in the Z-ADJ mode (see the ZPR68 instructions for details).

2 

RC68+