Xantech WPK6, WPK8 Applying Icons To The Waterpad Buttons, Tertight seal, it will void Warranty

8.The Waterpad is now wired into the final system (refer to Figs. 3 & 5) and all commands tested again -- before applying the button icons.

9.If the system functions correctly, the button icons can then be applied, as shown in Fig. 4. Finally, the Waterpad is mounted to the wall as shown in Fig. 6, 7, 8 & 9.

NOTE: The needed button icons are included with the Waterpad.

Applying Icons To The Waterpad Buttons

Each version of the Waterpad is supplied with 128 button icons on two mylar sheets. An assortment of both source and function icons are provided and were chosen to cover practically any conceivable installation. You will note that an extra set of Volume and Mute icons are provided in blue. Also, an extra set of function symbol icons (play, stop, pause, etc.) are provided in grey. Use these icons to enhance visibility under low light conditions or for color coding of functions or taste considerations. For indoor applications, you would normally use the more sedate white icons.

CAUTION: Before applying the icons, be sure to do the following first:

a)Complete all configuring and programming using the Dragon Drop IR software system.

b)Transfer the programmed data to the "real" Waterpad.

c)Print out a copy of the virtual programmed Waterpad from Dragon Drop and keep it nearby for reference.

d)Test each button on the "real" Waterpad (without the icons attached) and be sure it executes all desired commands.

e)Be sure the membrane surfaces of the Waterpad, your hands and the icon sheets, are completely dry and free of any grease or dirt.

1.Carefully peel off a desired icon from the sheets. Try not to touch too much of the adhesive surface.

2.Align it very carefully within the rectangular embossed button area on the membrane of the Waterpad and press it into place. See Fig. 4.

Be sure you have the correct button location. Use the printed virtual Waterpad as your guide.

CAUTION: You must be very certain that you have the correct location and that the icon is aligned

correctly.	The adhesive
is a waterproof type and										ICON (has adhesive backing)
is very aggressive. If you			ICONS on Paper
have to pull it up to repo-			Backed Sheet						AM
			(2 sheets included)						FM	ICON fits within
sition it, it may not bond
										embossed button
										area on membrane
well enough to hold prop-
erly the second time. You
would have to purchase			AUX	SAT	AM	INPUT	SHFL	5 SCRN	VOL
a spare set of icons in		WPK						SCRN	VOL
order to replace the dam-			AUX l	SAT 1		LINE	SHUT	6
		for
		labels
aged one(s).			CAM	SAT 2	AMP	MENU	SPKR	7	MUTE
		Custom						TNR
3. Affix the remainder of the			CATV	TAPE	ANT	MUTE	TIME	TNR
								8
icons in the same man-		#1				MUTE		9
			CD	TAPE 1	CLEAR		TRACK
						ON
ner.								TV
			CD 1	TAPE 2	DISC	MUTE	TV	TV
								0
CAUTION: If you dam-						OFF	VCR
					DISC
age the membrane (e.g.			CD 2	TUNER		OFF	UP			Membrane
					+			VOL
										WATERPAD™
by trying to dig out an			DAT	TV	DISC	ON	VIDEO	VOL
					---				(without decorator style cover plate)
icon with a knife, etc.)
so that it loses its wa-										Fig. 4 Icon Application
tertight seal, it will void
the warranty!
WPK1										5

Controllers