Xantech XDT77 Troubleshooting , Preset Tuning 2

Troubleshooting

If you experience any problems with the unit, please take a

moment to look through this chart and see if you can solve the

problem yourself before you call your dealer or service center.

No power

eCheck the connection to the AC power supply. Check and

make sure the AC source is not a switched outlet and that, if

it is, the switch is turned on. Make sure there is power to the

AC outlet by plugging another item such as a lamp or fan.

Cannot listen to any station, or signal is too weak.

eMake sure the antenna is properly connected.

eTune in the station properly.

eIf a TV is near the unit, turn it off.

eInstall the antenna again after relocating it to a better

reception position.

eAn external antenna may be required.

Though the broadcast is stereo, it sounds monaural.

ePress the FM MODE button.

Remote control doesn't work.

ePress the POWER switch to turn the unit on.

eIf the batteries are dead, change the batteries.

eUse remote control unit within the range (5m /15ft) and point

at the front panel.

eClear obstacles between the remote control unit and the

main unit.

eIf a strong light is near the unit, turn it off.

If normal operation cannot be recovered, unplug the power cord

from the outlet and plug it again.

Select a preset channel using the numeric buttons.

Or press the TUNING/PRESET button repeatedly until the

desired preset station is found.

Select the AM or the FM band by pressing the corresponding

button.

Settings are stored permanently, even when power is turned off

and the unit is unplugged.

21 3 21 3

TUNER 1 TUNER 2

Press the PRESET button.