Recharging the XPower Powerpack 600HD Battery
Recharging with a Generator’s Regulated 12 V DC Outlet
WARNING: Fire and explosion hazard
The generator output must be intended for battery charging and have an output of 15 V or less. An unregulated output or one that exceeds 15 V DC can damage the battery.
This may lead to accumulations of hydrogen, causing exposure to fire and explosion hazard.
Refer to the Owner’s Guide accompanying your generator for detailed instructions on connecting the generator to a unit like the XPower Powerpack.
You can recharge the battery of the XPower Powerpack using a generator in several ways:
•Using the AC charger to recharge the XPower Powerpack from a generator is possible, but would require extended generator running time.
•Using a generator which has an auxiliary regulated
12 V DC output designed for charging 12 V batteries. Most generators are equipped with them. Use this power source for faster charging.
•Using a generator with a regulated 12 V DC lighter socket. Follow the connection instructions in “Recharging with the DC Charging Cable” on page 28.
Most of the capacity will be recharged in a few hours.
Note: Battery Charge (%) indicator is only accurate when the XPower Powerpack has been disconnected from all appliances and all charging sources for 15 minutes.
Recharging From a Solar Panel
Small, unregulated 12 V solar panels rated to produce a maximum of 2.5 A (or 30 W) can be used to charge the XPower Powerpack through the AC charger input socket.
30 |
