Xantrex Technology 806-1055, 806-1020, 806-1840-01, 806-1840-02 manual Adjusting Feature Settings

Freedom Inverter/Charger Configuration

Adjusting Feature Settings

The Power and Select buttons can be used to:

•change the charging current setting,

•change the inverter mode setting,

•disable or enable the audible alarm,

•change the shutdown setting, and

•return to factory default settings.

Inverter

Power

Setting	LED Screen
Charging Current Setting	
Inverter Mode Setting	
Alarm Setting	
Shutdown Setting	
Factory Setting	

To change the charger’s charging current setting:

Status	STATUS
LED light

Utility

Battery

Fault

Select

FREEDOM HF

LED screen

Input Voltage (V)

Input Current (A)

Output Power (kW)

By default the charging current is set to  for Freedom HF 1000,  for Freedom HF 1055, and  for Freedom HF 1800 models.

1.	Press and hold the Inverter Power button for five seconds.
	The LED screen will flash “” intermittently.
2.	Press the Select button once.
	The LED screen will display the present charging current setting.
	Example, “” for a 40 A setting.
3.	Press the Select button again to change to the next setting.

Info and Settings LED lights

Figure 3 Display Panel

To cycle through the various feature settings:

1.Press and hold the Inverter Power button for five seconds to enter the feature settings mode.

2.Press the Inverter Power button to toggle between the following information:

	The LED screen shows the next setting. Example, “” for a 2 A
	setting.
4.	Continue pressing the Select button to cycle through each of the
	available settings – “”, “”, “”, and “”, such as in the case
	of Freedom HF 1800, until you reach the desired setting.
5.	Press and hold the Select button for five seconds to make the setting
	permanent.

975-0390-01-01 11