Xantrex Technology 975-0205-01-01 Using the DC Cable with Airplane Power Plug

1 36

4. Plug the device you want to operate into the

XPower inverter. See “Inverter Operation” on

page 13.

5. When the power inverter is not in use, unplug it

from the 12 V outlet to prevent slight discharge of

the battery.

Using the DC Cable with Airplane Power Plug

1. Plug the DC cable into the DC cable port on the

XPower inverter. See Figure 1.

2. Insert the plug of this cable into the 12 V outlet.

3. Plug the device you want to operate into the

XPower inverter. See “Inverter Operation” on

page 13.

Contents

Main XPower Pocket Inverter 100 ARTWORK NO. 975-0205-01-01 REV. A 2005-03-10 Owner's Guide by About Xantrex Trademarks Notice of Copyright Disclaimer Page Contents Page 1 Introduction Page 2 Important Safety Information Warnings and Cautions Page Page CAUTION: Output non-sinusoidal CAUTION Additional Safety Guidelines 3 Safety Features 4 Inverter Features Figure 1 5 Using the Inverter Using the DC Cable with Cigarette Lighter Plug Using the DC Cable with Airplane Power Plug Page 6 Inverter Operation CAUTION Battery Operating Time Interference with Electronic Equipment Page 7 Troubleshooting 18 PROBLEM: AC product will not operate, red FAULT light ON. Replacing the Fuse 8 Specifications Page 9 Warranty and Return Warran ty Page Page Page Disclaimer Product Exclusions Warning: Limitations On Use Page Return Material Authorization Policy Return Procedure Out of Warranty Service