10 XPower Inverter 1500 Owner’s Guide
Inverter Installation
6. Attach the other end of the negative DC input cable to the negative
terminal of the battery.
If you have installed a battery selector switch, set it to Off when
making the connection to prevent sparking.
NOTE: This the last cable connection. A spark is normal when you
make this connection to the battery without a battery selector switch.
If you have installed a battery selector switch, use it to select one of the
batteries or battery banks (house bank preferred over start bank).
7. Move the inverter’s ON/OFF switch to the On position.
The Power light should illuminate, indicating that the inverter is ready
for operation.