Tripp Lite owner manual Model B116-A03, Package Contents, Overview and Product Features

WARRANTY				for	Lite	Owner’s Manual
REGISTRATION				.com/warranty
	onlinea
			todayTripp
		FREE
Registerto .tripplite
	win
chance
product!	www
a
				DVI Single Link
	1-to-3 Splitter with Audio						1111 W. 35th Street, Chicago, IL 60609 USA
							Tripp Lite World Headquarters

Customer Support: (773) 869-1234

Model: B116-A03

www.tripplite.com

Package Contents

• B116-A03 DVI Single Link 1-to-3 Splitter • AC Adapter (100-240V), 5V 1A Output

• Owner's Manual

Overview and Product Features

The B116-A03 DVI Single Link 1-to-3 Splitter enables a single DVI+ Audio source to be split and displayed on up to three DVI monitors simultaneously. Key product features are:

•5V, 1A power consumption

•Supports bandwidths up to 4.95Gbps

•Supports resolutions up to 1920 x 1080

Installation

Figure 1: Location of Input/Output Connections

1.Connect the DVI source device to the splitter marked INPUT on the B116-A03. Connect DVI source headphones or speakers to the audio jack. (Figure 2)

Figure 2: Connection of DVI Sources

2.Connect the DVI and audio cables between the DVI displays and the B116-A03 splitters marked OUTPUT MASTER, OUTPUT SLAVE A and OUTPUT SLAVE B. (Figure 3)

•Make sure that the DVI and audio source cables are connected to the INPUT port, and that and the DVI and audio display cables are connected the OUTPUT ports.

•The lowest-resolution display must be connected to the OUTPUT MASTER port at all times. This resolution will be used for all slave monitors.

•OUTPUT SLAVE A and OUTPUT SLAVE B are interchangeable

Figure 3: Connection of Output Devices

3.Connect the cord from the DC adapter to the DC 5V jack and plug it into a wall outlet. The front POWER LED will illuminate. (Figure 4)

Figure 4: Connection of DC Adapter

4. Turn on the power to your DVI display before powering your DVI sources.

Troubleshooting

If you experience problems with your B116-A03, switch, try the following remedies:

•Ensure that source and display cabling is working properly. Connect a DVI cable between the source and the display to verify that the cable is functional. Repeat to test all cables.

•If DVI cables are functioning properly, use two cables to test the ports on the B116-A03 splitter. Connect one cable between the DVI source and the INPUT port. Use the second cable to plug between the OUTPUT MASTER and the DVI display. Using the same display, continue testing by connecting the display to OUTPUT SLAVE A and OUTPUT SLAVE B. If all ports work, the B116-A03 is functioning correctly.

•If the unit is plugged in and the Power LED is not lit, verify that the power supply is functioning. Use a voltmeter to measure the output of the DC adapter to verify that 5V is present. If output is 5V, the DC adapter is functional and the B116-A03 switch has failed. Note: The positive (+) is in the middle of the plug and the ground (-) is on the exterior of the plug.

Warranty & Warranty Registration on Page 4

Figure 1.

Figure 2.

Figure 3.

Figure 4.

Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices.

Copyright © 2007 Tripp Lite. All rights reserved.